QCR 500HZ Horizontal Baler
QCR 500HZ Horizontal Baler

QCR 500HZ Horizontal Baler

Designed for businesses producing large volumes of waste, this horizontal compactor is also a perfect solution if your site handles multiple types of waste due to a number of key features. This powerful baler with horizontal tying slots produces high density and securely tied mill size bales to drive down your waste collection costs and secure rebates. A bespoke hopper can be fitted to suit your prefered method of waste loading.

What types of material can be compacted in this horizontal waste compactor?

This Horizontal Waste Compactor handles diverse range of materials including cardboard, soft & rigid plastics, cans, drums, foam and shredded paper.

What are the key features of this baler?

  • This model is fitted with a vertically raised hydraulic operated bale discharge door which is operated with a two-handed remote station located at the front of the baler
  • This high quality baler has a special abrasion-resistant steel floor and plating on the underside of the packing ram to ensure machine longevity
  • It also has V-shaped serrated shear blades on the bale chamber with tool steel anvil type cutting knives on the packing ram. These features ensure maximum cutting efficiency and prevent downtime from blockages.
  • This baler is designed to fully eject each bale which enables your business to bale different recyclable materials each time a baler is completed preventing material contamination which impacts on the value of your bales
  • The machine operator can select high pressure or low pressure baling modes on the control panel to suit your type of waste
  • This machine has 60 second cycle time or you can upgrade to a fast cycle time of 40 seconds
  • For waste monitoring, the baler is fitted with an electronic counter which monitors and counts the number of bales produced as well as running time so the throughput can be monitored
  • The power pack cabinet is fully enclosed enaling it to be located outside
  • Features a baling wire holding tube for tidy storage of baling wire
  • Easy to use control panel

Bespoke Baler Upgrades Available

  • The control panel can be fitted on the left or right hand-side of the machine to suit your site needs, a remote set of operating controls can also be added for an additional cost
  • If a fast compaction time is important to your business, you can upgrade from the standard 60 seconds to only 45 seconds to speed up compaction
  • Fan-operated oil cooling system or oil heating systems can be fitted for an additional cost if the baler is going to be located in either an especially hot or cold environment
  • A vast array of Enhanced Monitoring Options are available including those where operators can be notified remotely of the status of the machine

Bespoke Baler Loading Upgrades Available

  • Various types of bin lifting mechanisms can be added to your baler to lift any size or design of bin
  • Many different waste conveyors can be added to your baler including PVC, rubber, screw auger and pneumatic extraction
  • QCR can also add a fixed safety cage to surround the bale discharge area for added site safety when the bales are being ejected from the baler

QCR specialise in providing tailored horizontal baling systems, when designing the perfect system for your business we will provide you with installation drawings to check we have fully understood your requirements.

Make An Enquiry

Technical Details

Bale Weight Up to 400kg
Bale Size H 750mm, W 1100mm, D 1200mm
Cycle Time 60 seconds standard or 40 seconds fast cycle
Pressing Force up to 38 tonnes
Operation Hydraulic horizontal baler
Power Motor: 5.5 kW, 32A
Supply voltage 3 phase, 400V, 50Hz
Noise level 80 d BA
Dimensions L 5790mm x D 1600mm (excluding hopper)
Product Code QCR 500HZ 38T Horizontal Waste Baler
You may also like